Instructions of Hootoo IP Camera Setup and Software Firmware update Recently more and more customers have purchased Hootoo IP camera. For some green hand, it requires more to set up this Hootoo IP camera. As a consequence, I prefer to post the Hootoo IP camera setup steps. Hope this will help you while receiving our products. Step 1: Hardware Instruction. 1. Install the Wi-Fi antenna. 2. Plug the power adaptor into camera. 3. Plug the network cable into camera and router/switch. Step 2: Software Installation. Install the follow software: 1. IP Camera Tool: Open the CD, click “IPCamSetup.exe”—”Next”—”Next”—”Close”. 2. ActiveX: Click “Appinstall.exe”—”Next”—”Install”—”Finish”. After this done, the icon “IP Camera Tool” will be displayed on desktop. Step 3: Real-time Video Demonstration. 1. Login: Double click “IP Camera Tool” icon on desktop, search the IP address, choose the one of your camera, double click to go to IE login interface. Default username: admin Password: no password. 2. Choose the language. English, Chinese, Spanish, German, Portuguese, French, Italian, Korean optional. 3. Choose the work mode. IE browser: choose ActiveX mode. Safari, Firefox, Google browser: Server push mode. Mobile phone: sign in mobile phone. 4. Sign in. Click Sign In, then can get video on real-time. No pictures problem with ActiveX Settings for IE Browser If use IE browser to connect the camera for the 1st time, maybe there is no image displayed, and there will be a clue to install the ActiveX. In this case, please do the follow steps: 1. Close the firewall of your computer. 2. Change the ActiveX settings, “IE” browser > “Tool” > “Internet Options” > “Security”> “Custom Level” > “ActiveX control and Plug-ins”, all the ActiveX options set to be “Enable”: In addition: you can also click “start” menu->”Internet Explorer”, choose “Internet attributes ” to enter, or via “Control Panel” ->”Internet Explorer”, enter to Security setting. 3. If there is still no image, please close your anti-virus software, and then try step 1 & 2 again. Wireless Settings 1. Make sure the router is wireless router. 2. Make sure the Wi-Fi antenna installed. 3. Make sure whether there is encryption of the WLAN of router, if there is encryption, keep the key. 4. Login the camera, click “Network”>”Wireless Lan Settings”>”Scan”, please scan 2 times, then you will find the WLAN from the list, choose the one you use. 5. If there is no encryption, just click “Submit”, if there is encryption, please input the key, then click “Submit”. 6. Wait about 30 seconds, the camera will reboot, then unplug the network cable. How to use DDNS 1. Login the camera: Click “Network”>”DDNS Service Settings”.

2. Choose the DDNS, there are 2 options: praca Od zaraz ustroń Manufacturer’s DDNS: Sędziszów anonse ełk This domain is provided by manufacturer.

If you liked this article and you would like to obtain more info with regards to Praca Od Zaraz Ustroń nicely visit the website.